KENDA 20X4.0 TO 20X4.25 FAT TIRE - HIGH QUALITY GRIP

NEW !!  SHOWROOM MODEL TIRES !! 

Rubber compound formulated to provide maximum grip and comfort

Tread design includes functional siping and grooves for superior traction in wet and dry riding conditions

Confidence inspiring traction you can feel when accelerating, braking and cornering.

Rice granular projection design: Pattern arrangement Twill design, large ground contact surface,
taking into account the driving stability and grip performance on good roads and light off-road conditions

Fat Bike Tire 20 x 4.0 parameters：
MAX LOAD 90KG (298 LBS),
Inflate to 40-210 Kpa (P.S.I. Rage 5-30/0.4-2.1 BAR.) MIN-MAX

The ultimate custom cruiser tire for maximum performance!

On 82 mm (3,23 inches) rim as shown it is 98 mm ( 3,86 inches) wide and 61 mm (~ 2,4 inches) high (above the rim).

This tire fits rims of widths 67 mm (~2,64 inces) to 102 mm (~4,02 inches) width!

If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.

NOTE: this product is only the Tire. No Tube is included.

Kenda Kraze Tire Installation

1. Install the Kenda Kraze tire and inner tube onto the rim. Make sure the tube is not twisted or pinched.

2. Put a small amount of air in the tire — just enough for it to take shape. Do not fill it all the way yet.

3. Slowly rotate the wheel and, as you go, press the tire into the rim with your hands.

4. Keep rotating and pressing the tire into the rim all the way around. Add a little more air if needed.

5. Once the tire is sitting evenly on the rim, inflate it to the recommended pressure on the sidewall. If it says 30 PSI, do not go over 30 PSI.

6. Spin the wheel and make sure the tire is seated evenly and running straight.

Remember:

A little air → Rotate → Press tire into rim → Rotate → Press → Repeat → Inflate to proper PSI.

Kenda Kraze tires have thick rubber, so there is no need to use excessive air pressure to seat the tire.